Furuno FAR-2157, Руководство по установке

Страница: 45 / 111

3-3
6. For Control Unit RCU-014:
a) While pressing and holding down the [HL OFF] key, press the [MENU] key five times.
b) Press the [0] key to show the INITIALIZE menu.
For Control Unit RCU-015:
See the procedure on the next page for how to show the INITIALIZE menu.
INITIALIZE menu
7.
RCU-014:
Press the [2] key to open the ECHO ADJ menu.
RCU-015:
Choose 2 ECHO ADJ and then push the thumbwheel.
ECHO ADJ menu
8.
RCU-014:
Press the [3] key to choose HD ALIGN.
RCU-015:
Choose 3 HD ALIGN and then push the thumbwheel.
9.
RCU-014:
Key in the bearing difference. The setting range is 0 to 359.9(°).
RCU-015:
Spin the thumbwheel to set the bearing difference and then push the thumbwheel.
The setting range is 0 to 359.9(°).
10.Confirm that the target echo is displayed at correct bearing on the screen and then push the
thumbwheel.
11.
RCU-014:
Press the [MENU] key to finish.
RCU-015:
Left-click the MENU box to finish.
[INITIALIZE]
1 BACK
2 [ECHO ADJ]
3 [SCANNER]
4 [INSTALLATION]
5 [OWN SHIP INFO]
6 [ARP PRESET]
7 [NETWORK]
8 [OTHER]
[ECHO ADJ]
1 BACK
2 CABLE ATT ADJ
AUTO/MANUAL
30
3 HD ALIGN
000.0 °
4 TIMING ADJ
0
5 MBS
0
6 DEFAULT ANT HEIGHT
5/7.5/10/
15
/20/
25/30/35/40/45/
more 50 m
7 NEAR STC CURVE
2/2.5/
3
/3.5/4.2
8 MID STC CURVE
3/
4
/5/6
9 FAR STC CURVE
6/
7
/8
0 RING SUPPRESSION
0