manualshive.com logo in svg

Furuno FA-150, Руководство оператора, Страница: 106 / 128

Поделиться
Скачать
Furuno FA-150 Скачать руководство пользователя страница 106

APPENDIX 

 

AP-17

RMC - Recommended minimum specific GPS/TRANSIT data 

$--RMC,hhmmss.ss,A,llll.ll,a,yyyyy.yy,a,x.x,x.x,xxxxxx,x.x,a,a*hh<CR><LF>
                     |           |    |     |           |     |   |    |       |         |   |   |   |
                     |           |    |     |           |     |   |    |       |         |   |   |  +--- 10
                     |           |    |     |           |     |   |    |       |         |   |   +----- 9
                     |           |    |     |           |     |   |    |       |        +--+------- 8
                     |           |    |     |           |     |   |    |      +--------------- 7
                     |           |    |     |           |     |   |   +--------------------- 6
                     |           |    |     |           |     |   +------------------------- 5
                     |           |    |     |           +---+---------------------------- 4
                     |           |    +---+---------------------------------------- 3
                     |          +--------------------------------------------------- 2
                    +---------------------------------------------------------- 1

    1. UTC of position fix 
    2. Status: A=data valid, V=navigation receiver warning
    3. Latitude, N/S
    4. Longitude, E/W
    5. Speed over ground, knots
    6. Course over ground, degrees true
    7. Date: dd/mm/yy 
    8. 

Not used

    9. Not used
    10. Checksum

    NOTE  Positioning system Mode indicator:
          A = Autonomous
          D = Differential
          E = estimated(dead reckoning)
          M = Manual input
          S = Simulator
          N = Data not valid

    The Mode indicator field supplements the Status field. The Status field
    shall be set to V=invalid for all values of Operating Mode except for 
    A=Autonomous and D=Differential. The positioning system Mode indicator 
    and Status field shall not be null fields.

 

ROT - Rate of turn 

$--ROT,x.x,A*hh<CR><LF>
              |    |    |
              |    |    +--- 3
              |    +----- 2
             +-------- 1

    1. Rate of turn, deg/min, "-"=bow turns to port
    2. Status: A=data valid, V=data invalid
    3. Checksum

 

Содержание FA-150

































































































































Отзывы:

Нет отзывов