Furuno DS-85, Руководство оператора, Страница: 14 / 44

1. OPERATION
3
1.5 Display Overview
As shown in the figure below, the DS-85 display is made up of three major parts, status bar, details
display, and guidance/alert info.
Status bar
The status bar is shown on every screen, and gives you a quick, at-a-glance view of the DS-85’s
current status. Icons and indications shown in the status bar are described in the table below.
Details display
The details for the selected display mode are shown in this section of the screen. See section 1.6
for display mode information.
Icon(s) Icon name Description
Display
mode Indicate the display mode.
[SPD/DIST]: Speed data and distance log.
[SPEED]: Speed mode
[DIST]: Distance log
Speed
measurement
method Show speed measurement method.
[STW]: Speed Through the Water (Doppler calculation).
[SOG]: Speed Over the Ground.
[STW A]: Speed Through the Water, automatic selection.
[SOG A]: Speed Over the Ground, automatic selection.
Display unit
function Show the function of the display unit.
[M]: Main display
[S]: Sub display
Ship speed
notification The speed notification is active but the current speed does not
meet the conditions of the speed notice. Does not appear on
sub displays.
Ship speed
notification The speed notification is active and the current speed meets the
conditions of the speed notice. Does not appear on sub dis-
plays.
Operational
status The icon rotates in a clockwise direction to indicate the equip-
ment is working normally.
Service mode
icons These modes are accessible only by service technicians. See
the Installation Manual for details.
The icons do not appear on sub displays.
High temperature High temperature detected at the transducer. Does not appear
on sub displays.
Status
bar
Guidance/alert info*
Details
display
* Example alert info display
System failure HOLD : LIST
SPD/DIST
SPEED
DIST
STW
SOG
STW
A
SOG
A
M
S
TEST
SIM