
1. INSTALLATION AND WIRING
6
4. Apply adhesive to the thread holes on the bottom of the radiator (4 locations).
5. Prepare four bolt assemblies; pass the spring washer (M8) and flat washer (M8)
through the each hex bolt (M8
u
30) then apply adhesive.
6. Fasten the radiator to the radiator bracket, using four bolt assemblies prepared at
Note:
Be sure to align the waveguide location between the radiator and radiator
bracket before fastening bolt assemblies.
Bottom view: Radiator
Adhesive
Flat washer
Spring washer
Hex. bolt
Adhesive
Hex. bolt
(4 pcs)
Align the waveguide
location.
Detailed view (after securing the radiator)
Содержание DRS12A X-Class
