Operation
Audio Operation
1. FREQUENCY SELECT
In RADIO mode. Press and hold
SEL
button for about 2 seconds to switch to radio
region selection mode, then press
or
VOLUME -
to select AREA USA or
AREA EUR.
2. TUNE/SEEK UP/DOWN
In RADIO mode:
1) Press and hold or button on the front panel or press and hold or
button on the remote control to automatically search up or down for an
available station from the current frequency.
2) Press or button on the front panel or press or button on the
remote control to manually search up or down step by step for your desired
station from the current frequency.
3. AS & PS FUNCTION
In RADIO mode:
1) When pressing and holding
ZONE 1
button on the front panel, the radio searches
from the lowest frequency and checks the signal strength until one cycle search
is finished, then the 10 strongest stations are saved to the corresponding preset
number memory band (FM0~FM9).
When the AS operation is finished, it will resume broadcasting the previous radio
station.
2) When pressing and holding
ZONE 2
button on the front panel, the radio searches
for each preset station from FM0. If the signal strength of the field is stronger
than the current station, the radio holds at that station for a few seconds with
releasing mute, and then searches again.
After PS operation is finished, it will resume broadcasting the previous radio
station.
4. PRESET STATION AND PRESET NUMBER [ 0-9 ] BUTTONS
In RADIO mode:
1) To memorize the current frequency station:
a) Press and hold one of the 10 number buttons (0-9) on the remote control to
store the current station.
b) Press and hold the
PLAY/PAUSE
button until the preset number flashes,
then press
PLAY/PAUSE
button repeatedly to select the preset numbers
from 0 to 9. Press and hold
PLAY/PAUSE
to confirm the selection.
2) To recall the preset memory on the current band, press one of the 10 number
buttons (0-9) on the remote control to broadcast the corresponding preset
station.
9
