24
TV Settings
Channel Setting
1. Press
MENU
button to remote control to
enter the main menu.
2. Use or to highlight
Channel
mode.
3. Use or to highlight the item you
would like to reset, then press or to
select the settings.
4. Press
OK
to confirm your selections or
settings and enter the sub menus.
5. Press
MENU
to return to the previous
menu or press
EXIT
at any time to exit the
setting.
Channel Menu
Air/Cable
Set the reception type.
Press or button to select
Air
or
Cable
based on your antenna
connection.
• Select
Air
when TV is connected to an indoor / outdoor antenna.
• Select
Cable
if you subscribe to a pay television service WITHOUT a
set top box.
Auto Scan
Automatically scan for
available channels.
Press or
OK
to enter sub
menu.
Cable
System
Press or button to select
STD / IRC
/
HRC / Auto
.
(Only available when you select Cable as the reception
type.) Press
or
button to highlight
Start to Scan
,
then press /
OK
button to start scanning available
channels.
Air Mode
Press
to highlight
Start to Scan
directly, then press
/
OK
button to start
Auto Scan
.
Favorite
Add or delete a channel in
the favorite list.
Press
or
button to select a channel, then press
ENTER
button
to add or delete the channel in the favorite list. A checkmark indicates
a channel has been added. You may also display your list of
Favorite
channels by pressing the
FAV
button on the remote control.
Channel List
Display your program list.
Press button to enter.
Show / Hide
Show or hide the channels
in your program list.
Press to enter sub-menu to show or hide channels already in memory.
Use / /
/
buttons to access the list of available channels.
Press
ENTER
to change the channels status. A checkmark will appear to
indicate that a channel has been added.
Channel No.
Select a channel number to
be labeled.
Press or button to select a channel to be labeled.
Channel
Label
Allow custom labeling to
name or rename a channel.
Press
/
buttons to highlight
Channel Label
to name or rename a
channel.
Press to enter the sub-menu to relabel a channel.
Use
/
buttons to spell out each letter, number or character.
Use / buttons to skip to the next space.
DVT Signal.
Display the current signal status.
