English
3
Explanation of Symbols
This manual has safety information and instructions to help
you eliminate or reduce the risk of accidents and injuries.
Always respect all safety warnings identified with these
symbols. A signal word will identify safety messages and
property damage messages, and will indicate the degree or
level of hazard seriousness.
DANGER
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate personal injury, or
property damage.
Important Safety Instructions
DANGER
●
DO NOT use
or modify the appliance for anything other
than it's intended purpose.
●
DO NOT use damaged electrical components, or touch
exposed areas of wiring.
●
DO NOT store explosive substances, such as aerosol
cans, in the appliance.
●
NEVER Immerse the cooler or electrical adaptors in
water, shield from rain fall.
●
DO NOT let children or incapable persons to play with
or use the appliance, supervise usage or store out of
reach.
●
NEVER attempt to service the product without
contacting Furrion.
●
DO NOT lift beyond your capabilities, use additional
help if necessary.
●
ONLY use Furrion approved accessories.
●
NEVER disconnect power, or handle the battery with
wet hands.
●
DO NOT use your cooler if it is damaged or
malfunctions in any manner.
●
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
Failure to follow instruction will result in serious injury,
property damage or death.
WARNING
●
If the SUPPLY CORD is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
●
The repair and maintenance of the cooler should be
conducted by the manufacturer, local dealer or qualified
personnel. Do not attempt to repair your cooler by
yourself, this will void the warranty.
●
Do not let the cord hang over the edge of a table or
counter or touch hot surfaces.
●
Do not unplug by pulling the cord, always grasp the plug
head.
WARNING
●
Do not attempt to move your cooler while it is still
plugged. To move your cooler safely, it should be
unplugged from power supply.
●
Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.
●
Do not damage the refrigerant circuit.
●
Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the
type recommended by the manufacturer.
HEALTH HAZARD
●
Food may only be stored in its original packaging or in suitable
containers.
●
Opening the lid for long periods can cause significant increase
of the temperature in the compartments of the device.
●
Clean regularly surfaces that can come in contact with food
and accessible drainage systems.
●
Store raw meat and fish in suitable containers in the device, so
that it is not in contact with or can drip onto other food.
●
If the device is left empty for long periods:
−
Switch off the device.
−
Defrost the device.
−
Clean and dry the device.
−
Leave the lid open to prevent mould developing within the
device.
CAUTION
●
Unplug your cooler when not in use or before cleaning.
●
Always keep lids closed before use.
●
It is recommended to operate the unit on a flat surface.
Maximum operation angle is 30°. During transportation,
its slope should be less than 30° and should be handled
carefully.
●
When not in use, unplug the adapter or solar panel, take
out the ePod
TM
Battery and empty the compartment.
Then allow the cooler to air dry.
●
The cooler should not be placed inverted.
●
Do not use abrasive powders or scouring pads since
they may scratch the exterior and interior surfaces of
your cooler. Use only mild soap and water and allow to
air dry.
