Problem
Possible Cause
Solution
No AC
output
AC plug is not plugged into outlet
properly
Confirm that the plug is inserted properly into the
socket.
Damaged AC power adapter/cord
or device.
Replace AC device or AC charging cord if necessary.
Make sure your AC powered device is not damaged.
Over-current protection stops
output power.
Reduce the power draw from the load and/or remove
powered devices. Restart AC output by pressing the
AC
ON/OFF
button for 1 second.
AC electric power is less than 10W.
Increase power draw from devices and/or add
devices. Restart AC output by pressing the AC
ON/
OFF
button for 1 second.
USB
devices
are not
charging
Incompatible USB cable or
damaged device.
Replace with a new compatible USB cable.
Check and make sure your USB powered device is
not damaged.
Device is using power faster than
gaining it.
Turn on power-saving mode or turn your device off
while it is charging.
DC connection is loose.
Confirm that USB cables are inserted properly into
USB output ports with proper connection.
USB cable is worn or damaged.
Replace with a new compatible USB cable.
Furrion ePod™ Power Station has
been turned off.
Press the
POWER
button for 3 seconds to turn on
the Furrion ePod™ Power Station.
When charging while in use (if in low battery mode), it is possible to discharge
the battery faster than it can charge. Refer to the following chart, should a similar
problem occur.
Problem
Possible Cause
Solution
No AC output and “
Lo
” flashing
10 seconds on the LCD
The battery is low to power the
AC device.
Keep charging until the AC can
be powered on.
No DC output “
Lo
” icon
displayed on the LCD
The battery is drained.
Keep charging until the "
Lo
" icon
disappeared.
NOTE:
Ambient temperature can also affect the charging rate characteristics of the battery.
15
