![Furrion 13SA-PS Скачать руководство пользователя страница 6](http://html.mh-extra.com/html/furrion/13sa-ps/13sa-ps_instruction-manual_2349319006.webp)
5
Before Installing
Read this installation manual completely
before installing the rooftop air
conditioner.
The following tips and instructions must
be observed while installing the rooftop
air conditioner.
What’s in the Box
Open the box and remove the
components from carton. Make sure you
have all the following items included in
the packaging, if any item is missing,
contact your dealer.
Rooftop Air Conditioner:
Rooftop Unit
Lower Duct
Divider
Upper Duct
Divider
Mounting Frame
Filter
Decoration Plate
ADB Shroud
Control Box
Bolt
EVA Foam
●
Rooftop unit x 1
●
Warranty Card x 1
Air Distributor Box (sold separately):
Rooftop Unit
Lower Duct
Divider
Upper Duct
Divider
Mounting Frame
Filter
Decoration Plate
ADB Shroud
Control Box
Bolt
EVA Foam
●
Upper Duct Divider x 1
●
Lower Duct Divider x 1
●
Bolt x 4
●
Mounting Frame x 1
●
Control Box (sold separately) x 1
●
ADB Shroud x 1
●
Filter x 2
●
Decoration Plate x 1
●
Self-tapping Screws x 6
●
Instruction Manual x 1
●
Warranty Card x 1
Choosing Proper Location for
the Air Conditioner
IMPORTANT:
The roof must be designed
to support the weight of the rooftop unit
and the weight of 2 installers standing
on the roof.
There are two ways of installing the
rooftop air conditioner:
●
Using the existing roof vent opening
in the vehicle roof.
●
Making a new opening. In this case
the opening should be reinforced by
an appropriate frame as required.
Existing Roof Vent Opening
The air conditioner is designed to fit over
an existing 14” roof vent opening.
New Opening
When no roof vent is available or another
location is desired, the following is
recommended:
●
For one unit installation - the air
conditioner should be mounted
slightly forward of center (front to
back) and centered from side to side.
●
For two unit installations, install
one air conditioner one third from
the front of the RV and the other air
conditioner two thirds from the front
of the RV, aligned in the center.
It is preferred that the air conditioner
be installed on a relatively flat and
horizontal roof section measured when