Furo Systems Furo X, Руководство пользователя

Страница: 10 / 15

8
Power On/Off
Hold down the MODE button and the display will switch on and light
up (if the battery has been switched on…). Hold down the MODE
button again and the display will switch off.
Walk assist mode
Press and hold the DOWN button for 2
seconds and your e-bike motor will start
to run at a uniform speed of 6 Km/h. The
display will show “P” on the screen whilst
in this “Walk Assist” mode.
Using The On-Board Computer
Led Backlight
Press UP for 2 seconds to turn on the backlight of the display. Hold
UP again for 2 seconds and the light is turned off.
Power assistance selection
Use the UP and DOWN buttons to
change the assistance provided by the
Motor. The power ranges from level 1 to
level 5
Access the settings
1- Hold both UP and DOWN for 2 second to enter the Settings Menu.
2- Then navigate through the settings by tapping the MODE button.
3- Use UP and DOWN to chooses settings and MODE to confirm
Trip distance
clearance
Select ‘y’ to clear
trip distance
Backlight
contrast
Choose level 1/2/3
screen backlight
brightness
Imperial and
Metric units
“1” is Imperial
“2” is Metric