furniture123 AGL049 Скачать руководство пользователя страница 4

3

 

• 

Children under 3 years should be kept away unless continuously 
supervised.  

• 

Some parts of this product can become very hot and cause burns.  
Particular attention has to be given where children and vulnerable people 
are present.  

• 

If the supply cord is damaged, it must be replaced by the manufacturer, its 
service agent or a similarly qualified person in order to avoid a hazard.  

• 

WARNING:

 In order to avoid overheating, do not cover the heater.  

• 

The heater must not be located immediately below a socket outlet.  

• 

CAUTION:

 In order to avoid a hazard due to the inadvertent resetting of 

the thermal cut-out, this appliance must not be supplied through an 
external switching device, such as a timer, or connected to a circuit that is 
regularly switched on and off by the user or utility.  

• 

Do not attempt to repair, disassemble or modify the appliance. This unit 
contains no user-serviceable parts.  

• 

Always unplug or disconnect the appliance from the mains power supply 
when not in use, or when moving or cleaning it. Do not pull the cord to 
unplug the heater.  

• 

Keep the heater clean. Do not allow any object to enter the ventilation or 
exhaust opening as this may cause electric shock, fire, or damage to the 
heater.  

• 

Do not use the appliance for other than its intended use. It is designed for 
domestic indoor use only.  

• 

There may be a trace of odour during the first few minutes of initial use, or 
after a period of storage. This is normal and will quickly disappear.  

• 

If the glass is damaged, do not use the heater in order to avoid a hazard.  

• 

Avoid the use of an extension cord, as the cord may overheat and cause a 
risk of fire.  

• 

This fireplace is hot when in use. To avoid burns, do not let bare skin touch 
hot surfaced. If provided, use handles when moving this appliance.  

• 

Keep combustible materials, such as furniture, pillows, bedding, papers, 
clothes and curtains at least 3 feet from the front and sides of this 
appliance.  

• 

This appliance is designed for indoor use only and is not intended for use 
in bathrooms, laundry areas and similar indoor locations.  Never locate this 
appliance where it may fall into a bathtub or otherwise become exposed to 
water.  

• 

Do not run the cord under carpeting. Do not cover the cord with throw 
rugs, runners or similar. Ensure the cord is kept away from traffic areas, 
and kept in a position which would not present a trip hazard.  

Содержание AGL049
















Отзывы: