Step 7
The 3 and 2 seater Split Motion Loungers
will arrive as two seperate units, both with
temporary plastic feet used to transport the
furniture (Fig 9. Circled in red) in the
centre. These feet need to be replaced with the
larger central support feet provided within the bag
(see step 1)
Fig 9. Left hand 3Str Split Motion Lounger unit
Fig 10. Plastic central foot replaces
temporary foot
Steps 7 - 11 apply to all Uniqa Models
Step 8
The two seperate units will have to
be attached via the brackets located
on the armless sides (see Fig 11).
There will be two on eitherside,
one at the front and one towards
the back. The right hand unit will need
to be pushed into the left hand unit to
slide the brackets together. Ensure both
brackets are secured before
proceeding
Connect the cables leading off into the transformer
and plug into power supply, then fully extend the motions
using the controls located on the outside of both the arms.
Step 9
13cm
Front of sofa
Step 10
To attach the centre foot, first locate the
bolt hole, situated approximately 13cm away from
the front of the sofa (Fig 15). Once located remove
the bolt from the metal bracket of the
centre foot and align the
hole to the sofa. Feed the bolt through
one side through the units and into the
opposite side of the bracket (Fig 16).
Tightly fasten the nut with a spanner to secure
the foot into place (Fig 17).
Brackets
Step 11
Once all feet have been attached
the sofa will now be ready to turn
onto its feet DO NOT PIVOT
SOFA ON BACK FEET instead lift
weight of sofa off the floor and turn
onto its feet. Once the sofa is
upright and in the desired
position replace all seat and back
cushions.
Fig 11. Shows locations of brackets
Fig 12 . illustrates the right hand
unit being pushed into the left hand unit
Fig 13 . cables fitting
into transformer
Fig 14. Shows the motions fully extended
Fig 15. Location of the bolt hole, approx 13cm from front of sofa
Fig 16. Location of the bolt hole, approx 13cm from front of sofa
Fig 17. Shows bolt securely fed through,
connecting both units.
Page 2 0f 2
Содержание Uniqa Series
Страница 1: ...Self Assembly Instructions ...
