12-27-2016
Page 2/4
ITEM NO: I39-300T 75" Exec Desk Top
aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
I39-300B 75" Exec Desk Bottom
STEP 1:Remove the drawers from the pedestals: Fully extend the drawer, then press the plastic tab down on the right
and up on the left at the same time as shown below. While holding the tabs pressed down/up, pull the drawer out.
Plastic Tab
STEP 2:Attach the modesty panel to left
pedestal and right pedestal by using 6 bolts(A),
lock washers(B) and flat washers(C). Do not
completely tighten bolts to allow some leeway
for adjustment in STEP 3.
A B
C
D
STEP 3:Put desk top on pedestals and modesty panel, attach the pedestals and modesty panel to the desk top by using
11 bolts(A), lock washers(B), flat washers(C). Completely tighten all bolts used in Steps 2 and 3. Save extra hardware
for optional swivel keyboard.
STEP 4: Replace all of the drawers in pedestals: Fully extend
the slides from the case. Then align the slides on the drawer to
the slides on the case as shown. Push the drawer back in. You
may have to slide the drawer in and out several times in order
to properly align the ball bearings.
A
B
C
D
Left pedestal
Right Pedestal
Modesty Panel
Desk Top
Left pedestal
Right Pedestal
