STEP 1: FIT TABLE LEGS
Prepare product as per page 2:
Take table leg [2] aline holes with threaded holes in base of table top [1], note ensure table leg is
pointed as shown in diagram.
Next with bolt [B] together with spring washer [C] and washer [D] insert into hole thru to thread
in table top, by hand seat bolt correctly turn 2-3 times to ensure bolt has a good grip. Do not
tighten yet.
Repeat above for other 3 bolts. Once all seated correctly take ALLEN KEY [A] and tighten all 4
bolts until firm. Do not overtighten. Fit other 3 legs same way, Assembly Complete.
With the help of another person please lift product into air and rotate the table until feet can be
place on floor. Warning do roll table on to legs and rotate to feet as this may damages fittings.
Step 1 Diagram
FINISHED
4
17DUM15M
