5
ASSEMBLY INSTRUCTIONS
SIDE TABLE
ASSEMBLY
Please follow pre-assembly instruction on page.2.
As indicated by diagram below place side table rim [c] upside down, locate the predrilled holes in
both side table leg [D] and side table rim. Aline leg holes with rim holes, while a second person
holds leg in position, take bolt [H] together with washer [I], insert thru hole and by hand seat the
thread correctly by turning 2-3 times and pull back to ensure bolt has gripped. Do not tighten yet.
Repeat for second hole of leg. Now go to opposite side of leg and repeat same process. Now take
tool [K] and tighten all four (4) bolts. Note do not over tighten as you may cause damage to
threads. Then repeat process again for the other leg. Assembly complete. Please pick up item and
stand on its feet, place glass panel [E] as indicated in diagram,