STEP 2: FIT TABLE TOP TO BASE
Please note this is a very heavy item and will require 2 reasonably strong people to pick up and
place into position.
With the help of another person or two remove top from carton. Ensure holes in bottom of table
top (1) are facing towards the ground. With help of another person pick table up by the long edge
1 person each side, centre to balance top on base as per diagram, once top (1) is stable, from
under table line up holes between steel plates (3) and table top, move slowly as to not upset
balance. Once lined up take Bolt (A) & Washer (C) insert into hole and by hand seat thread
properly, turn 2-3 times, at this point do not tighten, Repeat for all other bolts as per diagram 8 in
total. Once all bolts are seated correctly tighten using Allen keys (D) provided. Note do not
overtighten just till firm. Assembly Complete
Warning never drag table always lift FROMM THE SIDE and with the help of another person.
Dragging can cause damage to product and or your floor surface.
5
17ONY06B
Reverse Close up view
