ASSEMBLY INSTRUCTIONS
Page
14
ASSEMBLY IS COMPLETED
Make
sure
the product is rested on a flat surface and does not feel loose or wobbly. If it does, double
check that the bolts/screws are secured and properly tightened.
STEP8
Hardware #2
=
4pcs
Hardware #6
=
2pcs
1
2
13
3
Extend the two outer slides of the
runners so that they could align
with the sides of the drawer.
Make sure the pre-drilled holes
from the drawer align with the
screw holes of the outer slides.
Secure two screws from the
inside of the drawer using a
Phillips screwdriver to tighten
them to the outer slides.
A
C
B
O
6
6
2
2
2
2
