Furniture of America Spring Creek CM-BK604, Руководство по сборке, Страница: 8 / 11

1. Align the guardrail supports (#10) to the
pre-drilled holes located along the sides
of the upper side rails (#4) and guardrails
(#5). Insert a total of 6 bolts (#D) and
secure using the Allen wrench (#I).
2. Apply the center support (#9) onto
the slots located along the inner sides
of the upper end guardrails (#2). Insert
a screw (#C) into each end and secure
using a Phillips screwdriver.
Place the full slat kit (#6) onto the upper
side rails (#4). Align the ends of the slats
to the pre-drilled holes located on the
inner side of the upper side rails (#4).
Insert a screw (#C) into each end and
secure using a Phillips screwdriver.
#4