Page 4 of 5
I.
Align the support rail (#4)
with the pre-drilled holes
on the back of the vanity
(#1) AND the mirror (#3).
II.
Secure 4 screws (#D) into
the support rail (#4) using
a Phillips screwdriver to
tighten them to the vanity
(#1) AND the mirror (#3).
III.
Repeat the process above
to assemble the other
mirror support rail (#4)
onto the vanity (#1) AND
the mirror (#3).
I.
With the help of another person,
carefully place the vanity (#1)
facing down on a protected
surface.
II.
Align the 4 vanity legs (#2) with
the pre-drilled holes on the
corners of the vanity (#1).
III.
Prepare 8 bolt assemblies by
inserting FIRST the lock washer
(#B) onto the bolt (#A) and then
the flat washer (#C) onto the
SAME bolt (#A), in that order.
IV.
Insert the bolt assemblies
through the pre-drilled holes on
the corners of the vanity (#1) and
secure those bolts using the
Allen wrench (#E) to lock them
with the vanity legs (#2).
Turn right (clockwise) to tighten
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
#D x 8 pcs
Turn right (clockwise) to tighten
Содержание Potterville CM-DK6490
Страница 2: ...Page 2 of 5 ...
