Furniture of America Pioneer CM7449CK, Руководство по сборке

Страница: 5 / 10

Turn right (clockwise) to tighten
Page 5 of 5
#E x 8 pcs
ASSEMBLY IS COMPLETED
1. Align the 4 assembled
slats (#5) with the pre-
drilled holes on the side
rails (#3).
2. Secure 2 screws (#E) onto
the ends of each
assembled slat (#5) using
a Phillips screwdriver to
tighten them with the side
rails (#3).
3. If needed, adjust the
levelers according to the
ground level. To lower or to
raise the slat support leg,
turn the levelers clockwise
or counterclockwise,
respectively.
I. Align the threaded end of the 2 slat support legs (#6) with
the pre-drilled holes on the slat (#5) and tighten by hand
until secured.
II. Repeat the process above to assemble the remaining 6
slat support legs (#6) onto the 3 remaining slats (#5).
Adjust the levelers according to the
ground level on Step 4.