Furniture of America Orbe CM4006-3PK, Инструкция по сборке

Страница: 4 / 5

I. Insert 4 wood dowels (#E) onto the
bottom base (#4).
II. Align the foot (#5) with the wood
dowel (#E) and the pre-drilled hole
on the corner of the bottom base
(#4).
III. Prepare a bolt assembly by
inserting FIRST the lock washer
(#B) onto the bolt (#A) and then the
flat washer (#D) onto the SAME
bolt (#A), in that order.
IV. Insert the bolt assembly through the
hole of the foot (#5) and secure that
bolt using the Allen wrench (#F) to
lock it in with the bottom base (#4).
V. Repeat the process for the
remaining 3 feet (#5).
#2
I. Position the cross supports (#3)
to form an “X”.
II. Align the bottom base (#4) with
the 4 pre-drilled holes of the
cross supports (#3).
III. Prepare 4 bolt assemblies by
inserting FIRST the lock washer
(#B) onto the bolt (#A) and then
the flat washer (#D) onto the
SAME bolt (#A), in that order.
IV. Insert the 4 bolt assemblies
through the holes of the bottom
base (#4) and secure those bolts
using the Allen wrench (#F) to
lock them in with the cross
supports.
Turn right (clockwise) to tighten
Page 4 of 5
#4
#A x 4 pcs
#B x 4 pcs
#D x 4 pcs
#A x 4 pcs
#B x 4 pcs
#D x 4 pcs
#E x 4 pcs
#1