Furniture of America Mandeville CM7986Q, Руководство по сборке

Страница: 12 / 12

Page 6 of 6
Align the ends of the assembled slat (#7) with the pre-drilled
holes on each side of the side rails (#6). Secure two screws
(#A) onto each end of the slat (#7) by using a Phillips
screwdriver to tighten them down to the bed rails. Repeat the
process for the remaining 3 slats (#7).
Turn right (clockwise) to tighten
#A x 8 pcs
Each slat (#7) has two slat support legs (#8). Align the
threaded end of the slat support legs (#8) with the pre-drilled
holes of the slat (#7) and tighten by hand until secured.
Repeat the process for attaching the remaining 6 slat support
legs (#8) onto the 3 slats (#7).
Enlarged
ASSEMBLY IS COMPLETED
Adjust the leveler according to the ground
level. To lower or to raise the support leg,
you need to turn the leveler clockwise or
counterclockwise, respectively.