Page 4 of 4
I.
Carefully turn the completed bench upright. Make sure the
bench is rested on a flat surface and does not feel loose or
wobbly. If it does, double check that the bolts/screws are
secured and properly tightened.
II.
If needed, adjust the levelers according to the ground level. To
lower or to raise the leg, turn the leveler clockwise or
counterclockwise, respectively.
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
I.
Carefully place the bench
(#1) facing down on a
protected surface.
II.
Align the 4 legs (#2) with the
pre-drilled holes on the
corners of the bench (#1).
III.
Prepare 8 bolt assemblies
by inserting FIRST the lock
washer (#C) onto the bolt
(#A) and then the flat washer
(#B) onto the SAME bolt
(#A), in that order.
IV.
Insert the bolt assemblies
through the pre-drilled holes
on the corners of the bench
(#1) and secure those bolts
using the Allen wrench (#D)
to lock them with the 4 legs
(#2).
Turn right (clockwise) to tighten
ASSEMBLY IS COMPLETED
Содержание Frontier CM3603BN
Страница 2: ...Page 2 of 4 ...
