Page 4 of 5
#A x 6pcs
#B x 6pcs
#C x 6pcs
I.
Align the left HB leg (#2) with the
pre-drilled holes of the headboard
(#1).
II. Prepare 3 bolt assemblies by
inserting FIRST the lock washer
(#C) onto the bolt (#A) and then
the flat washer (#B) onto the
SAME bolt (#A), in that order.
III. Insert the bolt assemblies through
the left HB leg (#2) using the Allen
wrench (#D) to lock them with the
headboard (#1).
IV. Repeat the
process above
to
assemble the right HB leg (#3)
onto the headboard (#1).
Note: Right and left
are determined by
facing the FRONT
of
the bed in its
upright position.
Turn right (clockwise) to tighten
I. Insert the hooks of the two side
rails (#5) into the slotted bars of
the headboard (#1). Make sure
the parts are secured properly.
II. Insert the hooks on the other ends
of the two side rails (#5) into the
slotted bars of the footboard (#4).
Make sure the parts are secured
properly.
#1
#3
#2
#D
#A
#B #C
#1
#5
#4
#5
#5
