Furniture of America CM7909F, Инструкция по сборке

Страница: 4 / 5

Step 1
I. Insert the hooks of the side rail (#3) onto the slotted bars of the
headboard (#1). Make sure the two hooks are secured properly and
then repeat the process for the other side rail (#3) to the other side of
the headboard (#1).
II. Insert the hooks of the side rail (#3) onto the slotted bars of the
footboard (#2). Make sure the two hooks are secured properly and
then repeat the process for the other side rail (#3) to the other side of
the footboard (#2).
.
Step 2
Carefully lay out the 12-piece slat kit (#4) onto the bed rails (#3) as shown
below. Please note that there are 4 slats that have pre-drilled holes for
the support leg (#5). Install the support leg (#5) onto the slat with the pre-
drilled center hole by aligning the threaded end of the support leg (#5)
and tighten by hand until secured. Repeat the process for the remaining
3 support leg (#5).
Page 4 of 5
Enlarged
Enlarged
#4
Turn right (clockwise) to tighten