Furniture of America CM7056-CK, Руководство по сборке

Страница: 22 / 23

Turn right (clockwise) to tighten
Page 4 of 5
#B x 8 pcs
#C x 8 pcs
#D x 8 pcs
I. Align the feet (#4) onto the pre-drilled holes on the bottom corners of the
headboard (#1).
II. Prepare 4 bolt assemblies by inserting FIRST the lock washer (#D) onto the
bolt (#B) and then the flat washer (#C) onto the SAME bolt (#B), in that
order.
III. Insert the bolt assemblies through the holes of the feet (#4) and secure
those bolts using the Allen wrench (#F) to lock them in with the headboard
(#1).
IV. Repeat the process above to assemble the feet (#4) onto the footboard
(#3).
Turn right (clockwise) to tighten
I. Prepare 4 bolt assemblies by inserting
FIRST the lock washer (#D) onto the bolt
(#A) and then the flat washer (#C) onto
the SAME bolt (#A), in that order.
II. Insert two bolt assemblies through each
side of the pre-drilled holes of the
headboard (#1) using the Allen wrench
(#F) but expose about ½” of the bolts’
threads.
III. Mount the brackets of the side rails (#2)
onto the bolts (#A) on each side of the
headboard (#1). Make sure all the
washers are in the FRONT of the
brackets. Use the Allen wrench (#F) to
tighten the bolts with the two parts
together.
IV. Repeat the process I through III above to
assemble the other ends of the side rails
(#2) onto the footboard (#3).
#A x 8 pcs
#C x 8 pcs
#D x 8 pcs