Furniture of America CM7008T, Инструкция по сборке, Страница: 4 / 5

Turn right (clockwise) to tighten
Page 4 of 5
#B x 8 pcs
#C x 8 pcs
#D x 8 pcs
I. Align the two HB/FB legs (#5) with the pre-drilled holes underneath the
headboard (#1).
II. Prepare 4 bolt assemblies by inserting FIRST the lock washer (#D) onto the
bolt (#B) and then the flat washer (#C) onto the SAME bolt (#B), in that
order.
III. Insert the bolt assemblies through the holes of the two HB/FB legs (#5) and
secure those bolts using the Allen wrench (#F) to lock them with the
headboard (#1).
IV. Repeat the process above to assemble the remaining two HB/FB legs (#5)
onto the footboard (#3).
Turn right (clockwise) to tighten
#A x 8 pcs
#C x 8 pcs
#D x 8 pcs
I. Prepare 4 bolt assemblies by
inserting FIRST the lock
washer (#D) onto the bolt (#A)
and then the flat washer (#C)
onto the SAME bolt (#A), in
that order.
II. Insert the bolt assemblies
through the right and left side
of the pre-drilled holes of the
headboard (#1) using the Allen
wrench (#F) but expose about
½” of the bolts’ threads.
III. Mount the brackets on the side
rails (#2) onto the bolts (#A) on
each side of the headboard
(#1). Make sure all the
washers are in the FRONT of
the brackets. Use the Allen
wrench (#F) to further tighten
the bolts to secure the two
parts together.
IV. Repeat the process above to
assemble the other ends of the
two side rails (#2) onto the
footboard (#3).