Furniture of America CM5003-TV, Руководство по сборке

Страница: 13 / 17

Page 13 of 17
Turn right (clockwise) to tighten
Drywall: Select a location where you want the TV stand to be strapped. Mark on the wall the
location where the anchor (#M) will be placed. Drill a hole slightly smaller then the size of the screw
(#O). Push the anchor (#MF) as far as it will go with your finger. Tap gently with a hammer until the
anchor (#M) is flush with the wall surface. Secure the bracket (#L) using a Phillips screwdriver to
tighten the screw (#O) into the anchor (#M). Insert the safety strap (#N) through the bracket (#L)
from the wall and the bracket from behind the TV mount and pull the safety strap (#N) to tighten.
- OR -
Wood Stud (Recommended): Find a wood stud behind the wall (no anchor is needed for wood
stud). Drill a hole smaller then the size of the screw (#H) into the wood stud. Align the bracket (#L)
with the drilled hole and tighten the screw (#O) using a Phillips screwdriver to secure the bracket
(#L). Insert the safety strap (#N) through the bracket from the wall and the bracket from behind the
TV mount and pull the safety strap (#N) to tighten.
SAFETY STRAP TO PREVENT TIP-OVER