Page 5 of 5
Insert the 2 covers (#I) over the 2 hex nuts (#G) secured to
the pedestal (#2).
#I x 2 pcs
ASSEMBLY IS COMPLETED
I.
Carefully place the table in its
upright position. Make sure the
table is rested on a flat surface
and does not feel loose or
wobbly. If it does, double check
that the bolts/screws are
secured and properly tightened.
II.
If necessary, adjust the levelers
(#E) according to the ground
level. To lower or to raise the
levelers (#E), turn the levelers
clockwise or counterclockwise,
respectively.
Содержание CM4825-S
Страница 2: ...Page 2 of 5 ...
