Insert 5 cam bolts (#F1) into the table top (#1). See diagram below and refer
to “CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS” for connecting
those parts together. Once locked, insert 5 cam covers (#G) over the 5 cam
connectors (#F2).
Carefully turn the completed table upright. Make sure the table is rested on a
flat surface and it does not feel loose or wobbly. If it does, double check that
the bolts are secured and properly tighten.
Page 6 of 6
Insert 4 cam bolts (#F1) and 2 cam connectors (#F2) into the left panel (#4).
See diagram below and refer to “CAM LOCK FASTENER ASSEMBLY
INSTRUCTIONS” for connecting those parts together. Once locked, insert a
7 cam covers (#G) over the 7 cam connectors (#F2) as shown below.
ASSEMBLY IS COMPLETED
#F1 x 4 pcs
#F2 x 2 pcs
#G x 7 pcs
#F1 x 5 pcs
#G x 5 pcs
Содержание CM4644WH-C
Страница 2: ...Page 2 of 6...
