Page 4 of 5
#E x 4 pcs
#A x 4 pcs
#C x 2 pcs
#G x 2 pcs
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
I.
Align the center stand support (#2)
with the 2 leg stands (#1).
II.
Insert 2 Allen screws (#C) through
the leg stands (#1) and secure
those screws (#C) using the Allen
wrench (#F) to lock them with the 2
leg stands (#1). Screw 2 knobs (#G)
onto the heads of the Allen screws
(#C) until secured.
III.
Align the 2 lower stand supports
(#3) with the 2 leg stands (#1).
IV.
Secure 4 flat-head bolts (#A)
through the lower stand supports
(#3) using the Allen wrench (#F) to
lock them with the 2 leg stands (#1).
Align the threaded ends of the 4 levelers (#E) with the pre-drilled
holes on the 2 leg stands (#1) and tighten by hand until secured.
Adjust the levelers according to the
ground level on Step 4.
Содержание CM4230C
Страница 2: ...Page 2 of 5...
