Furniture of America CM3710PC-2PK, Руководство по сборке

Страница: 6 / 6

Page 6 of 6
ASSEMBLE EVERYTHING EXACTLY THE SAME FOR THE SECOND CHAIR
Turn right (clockwise) to tighten
I. Secure all the leg supports with
6 wood screws (#G) using a
Phillips screwdriver to lock them
with the backrest with legs (#1),
the right front leg (#3) and the
left front leg (#4).
II. Carefully place the completed
chair upright. Make sure the
chair is rested on a flat surface
and does not feel loose or
wobbly. If it does, double check
that the bolts are secured and
properly tightened.
#G x 6 pcs
#A x 4 pcs
#B x 4 pcs
#E x 4 pcs
Turn right (clockwise) to tighten
I. Insert the front leg support (#7)
between the right front leg (#3)
and the left front leg (#4).
II. Insert the right leg support (#5)
and the left leg support (#6) into
the backrest with legs (#1) and
the other ends of the leg
supports into the assembled
right front leg (#3) and the left
front leg (#4).
III. Prepare 4 bolt assemblies by
inserting FIRST the lock washer
(#B) onto the bolt (#E) and then
the flat washer (#A) onto the
SAME bolt (#E), in that order.
IV. Insert the bolt assemblies
through the corners of the seat
(#2) and secure those bolts
using the Allen wrench (#F) to
lock them with the right front leg
(#3) and the left front leg (#4).
Note: Right and left are
determined by facing the front of
the chair in the upright position.