Furniture of America CM3603T, Инструкция по сборке

Страница: 4 / 4

Page 4 of 4
I. With the help of another person, carefully turn the completed
table upright. Make sure the table is rested on a flat surface and
does not feel loose or wobbly. If it does, double check that the
bolts/screws are secured and properly tightened.
II. If needed, adjust the levelers according to the ground level. To
lower or to raise the leg, turn the leveler clockwise or
counterclockwise, respectively.
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
I. With the help of another
person, carefully place the
table top (#1) facing down
on a protected surface.
II. Align the 4 legs (#2) with the
pre-drilled holes on the
corners of the table top (#1).
III. Prepare 8 bolt assemblies
by inserting FIRST the lock
washer (#C) onto the bolt
(#A) and then the flat washer
(#B) onto the SAME bolt
(#A), in that order.
IV. Insert the bolt assemblies
through the pre-drilled holes
on the corners of the table
top (#1) and secure those
bolts using the Allen wrench
(#D) to lock them with the 4
legs (#2).
Turn right (clockwise) to tighten
ASSEMBLY IS COMPLETED