1. Prepare 8 bolt assemblies by first
inserting a lock washer (#D) onto
the bolt (#A) then a flat washer
(#C) onto that same bolt (#A).
2. Place the table top support panel
(#3) onto the legs (#4), then insert
4 bolt assemblies into each panel.
Secure using the Allen wrench (#E).
1. Turn the legs
face down.
2. Insert a bolt (#F) into the
hole along the side of the
legs (#4), shown below.
Turn right to tighten.
3. Apply the leg support (#5) onto
those bolts (#F), then apply a half
round washer (#G), flat washer (#C),
lock washer (#D), and nut (#H). In
that order. Secure using the wrench.
