Furniture of America CM3418T, Инструкция по сборке

Страница: 4 / 5

Page 4 of 5
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
I. Align the table base (#5) with the
pre-drilled holes on the other end
of the pedestal (#3).
II. Prepare 4 bolt assemblies by
inserting FIRST the lock washer
(#C) onto the bolt (#A) and then
the flat washer (#B) onto the
SAME bolt (#A), in that order.
III. Insert the bolt assemblies through
the pre-drilled holes on the table
base (#5) and secure those bolts
using the Allen wrench (#D) to
lock them with the pedestal (#3).
IV. Repeat the process above to
assemble the other table base
(#5) onto the other pedestal (#3).
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
I. Align the pedestal base (#4) with the
pre-drilled holes on the pedestal
(#3).
II. Prepare 4 bolt assemblies by
inserting FIRST the lock washer (#C)
onto the bolt (#A) and then the flat
washer (#B) onto the SAME bolt
(#A), in that order.
III. Insert the bolt assemblies through
the pre-drilled holes on the pedestal
base (#4) and secure those bolts
using the Allen wrench (#D) to lock
them with the pedestal (#3).
IV. Repeat the process above to
assemble the other pedestal base
(#4) onto the pedestal (#3)