Furniture of America CM3311PC-2PK, Инструкция по сборке

Страница: 4 / 5

I. Place the seat (#2) on a protected surface. Apply glue (#H) onto
the ends of the front leg support (#7) and then insert the leg
support (#7) into the right front leg (#3) and the left front leg (#4).
II. Align the front legs (#3 & #4) with the pre-drilled holes on the
corner of the seat (#2).
III. Prepare 4 bolt assemblies by inserting FIRST the lock washer
(#D) onto the bolt (#B) and then the flat washer (#E) onto the
SAME bolt (#B), in that order.
IV. Insert the bolt assemblies through the corners of the seat (#2)
and secure those bolts using the Allen wrench (#F) to lock them
with the front legs (#3 & #4).
Turn right (clockwise) to tighten
Page 4 of 5
#B x 4 pcs
#D x 4 pcs
#E x 4 pcs
I. Apply glue (#H) onto the ends of
the right leg support (#6) and the
left leg support (#5) and then
insert them into the pre-drilled
holes of the backrest with legs
(#1).
II. Align the assembled seat (#2) with
the pre-drilled holes of the
backrest with legs (#1). Insert the
other ends of the right leg support
(#6) and the left leg support (#5)
into the right front leg (#3) and the
left front leg (#4).
III. Prepare a bolt assembly by
inserting FIRST the lock washer
(#D) onto the bolt (#C) and then
the flat washer (#E) onto the
SAME bolt (#C), in that order.
IV. Insert the bolt assembly through
the center hole of the seat (#2)
and secure that bolt using the
Allen wrench (#F) to lock it with
the backrest with legs (#1).
#C x 1 pc
#D x 1 pc
#E x 1 pc
Turn right (clockwise) to tighten
Note: Right and left are
determined by facing the
front of the chair in the
upright position.