Page 4 of 5
I.
Align the 2 mirror support rails (#4) with the pre-drilled holes on
the back of the mirror (#3).
II.
Secure 4 screws (#D) into the 2 mirror support rails (#4) using a
Phillips screwdriver to tighten them to the mirror (#3).
I.
With the help of another person,
carefully place the vanity table
(#1) facing down on a protected
surface.
II.
Align the 4 table legs (#2) with the
pre-drilled holes on the corners of
the vanity table (#1).
III.
Prepare 8 bolt assemblies by
inserting FIRST the lock washer
(#B) onto the bolt (#A) and then
the flat washer (#C) onto the
SAME bolt (#A), in that order.
IV.
Insert the bolt assemblies through
the pre-drilled holes on the
corners of the vanity table (#1)
and secure those bolts using the
Allen wrench (#E) to lock them
with the table legs (#2).
Turn right (clockwise) to tighten
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
#D x 4 pcs
Turn right (clockwise) to tighten
Содержание CM-DK6405
Страница 2: ...Page 2 of 5 ...
