Furniture of America CM-BK928TT, Руководство по сборке

Страница: 6 / 7

Align the 2 bed side frames (#9) to the pre-drilled
holes on the ends and insert bolts (#A) into each
pre-drilled hole. Secure using the Allen wrench
(#F). Then align 2 middle frames (#10) to the pre-
drilled holes along the center and insert bolts (#A)
into each hole. Secure using the Allen wrench (#F).
I. Align the rear
connect bar (#7)
and the front
connect bar (#8)
to the bottom pre-
drilled holes along
the sides of the
lower bed rails.
Make sure they
match the upper
rail placements.
II. Align a spacer (#E)
to each end and insert
bolts (#D). Secure using
the Allen wrench (#F).
I. Align the top part of the front guardrail (#6)
and the rear guardrail (#5) to the top pre-
drilled holes on the upper end rails.
II. Insert a bolt (#B) into each end from within.
Secure using the Allen wrench (#F).
I. Align the front guardrail (#6) and the rear guardrail
(#5) to the corners of the upper end rails.
II. Align a spacer (#E) to each end and insert
bolts (#D). Secure using the Allen wrench (#F).