Furniture of America CM-AC6051, Руководство по сборке

Страница: 3 / 16

Page 3 of 16
Cam Lock
Cam Lock Fastener Assembly
Cam Pin
Cam Lock are fasteners used to join two boards
together, usually the edge of one board (A) to the flat
side of another board (B).
Flat side
Board A
Board B
edge to
join
To use Cam Lock
Fasteners:
Step 1 - Insert
cam Pin into the
flat side of a
board. Tighten
only until snug. Do
not over-tighten
Step 2 - Fit the
hole in the
edge of the
joining board
over the Cam
Pin. The head
of the Cam Pin
will be visible in
the large hole
in the side of
the joining
board, as in
Step 3.
Step 3 - Notice the Cam Lock has a "C" -Shaped back. An
arrow on the front points the same direction as the open
section. Insert the Cam Lock into the large hole so the
opening of the "C" fits over the head of the Cam Pin.
arrow
head of the Cam Pin
Open section of back
fits over the head os
the Cam Pin
Step 4 - Use a flat screwdriver to turn the Cam Lock
clockwise on half a turn so it locks onto the head of the Cam
Pin. Turn only until it is snug - over-tightening could cause the
Cam to bend or break.
If is will not turn the full amount, turn the Cam Pin out
(counter- clockwese ) one full turn, and try the Cam Lock
again.