Furngully GROVE BL-5, Руководство пользователя

Страница: 10 / 32

3 | MEASURE WIDTH AND LOCK INTO POSITION
Measure from end leg to end leg until you fine the approximate
width of the worksurface. To find the optimal placement for
locking, insert the screw through the overlapping beam slots and
into the black plastic piece.
Slightly tighten the screw with only a few turns. DO NOT fully
tighten.
4 | SECURE FIRST SURFACE
Position the surface on the desk frame. Align the outer sides of
the surface flush and parallel with the outer sides of the end legs.
Adjust beam positions if sides are not flush. Fasten the surface to
the desk frame with wood screws through the leg brackets into the
underside of the surface.
#"
#"
L
-S
H
A
P
E
GRO
VE
7