Furman Elite15DM, Руководство пользователя, Страница: 6 / 8

ELITE 15 DM OWNER’S MANUAL
To connect your cabling to these in-line
protectors, simply follow the in and out
indications marked next to the Telco, Cable
and Satellite connectors.
Note: It is not possible to make an in-line cable
or satellite protector “virtually maintenance-free”
as we have accomplished with the 120 VAC line.
This would necessitate limited signal bandwidth
that would not allow the signal to pass. Under
extreme conditions, it is possible that the surge
suppression in one of these devices could sacrifi ce
itself after a catastrophic event. If the telephone,
cable or satellite signal will no longer pass through
our protector, please contact your local service
representative, installer or Furman for servicing.
Since these circuits are modular, replacement
may be accomplished in seconds with a new
TVSS module. To test this, simply disconnect the
incoming and out going cable from the Elite-15 DM.
Connect the incoming connector to the component
that formerly received the out going connector, thus
by-passing the in-line protection. If the signal is
present (but not when used with the Elite-15 DM)
then the protection circuit is damaged (assuming
it worked properly before a storm or catastrophic
event).
Warranty
Furman Sound, Inc. warrants to the original purchaser of
this product, the Furman Elite-15 DM, that the product
will be free from defects in material and workmanship for
a period of three years from the date of purchase. The
purchaser of the product is allowed fi fteen days from the
date of purchase to complete warranty registration by
mail or on-line at the Furman website. If the purchaser
fails to complete the aforementioned registration, the
warranty period will be reduced to one year from the date
of purchase.
If the product does not conform to this Limited Warranty
during the warranty period (as herein above specifi ed),
purchaser shall notify Furman in writing of the claimed
defects. If the defects are of such type and nature as to
be covered by this warranty, Furman shall authorize the
purchaser to return the product to the Furman factory or
to an authorized Furman repair location. Warranty claims
should be accompanied by a copy of the original purchase
invoice showing the purchase date; this is not necessary if
the Warranty Registration was completed either by mailing
in the completed warranty card or by registering on-line
at the Furman website. Shipping charges to the Furman
factory or to an authorized repair location must be prepaid
by the purchaser of the product. Furman shall, at its own
expense, furnish a replacement product or, at Furman’s
option, repair the defective product. Return shipping
charges back to purchaser will be paid by Furman.
CONNECTED EQUIPMENT WARRANTY: Furman
Sound’s Connected Equipment Warranty covers
equipment that is damaged by transient voltage (an
“Occurrence”) while properly connected through the
Furman Elite-15 DM to a properly wired AC power line
with a protective ground in an indoor location. Furman’s
Connected Equipment Warranty is limited to the amount
of the deductible on the Purchaser’s personal property
insurance policy up to $500.00. In order to make a claim
for this Connected Equipment Warranty, the Purchaser
must forward a copy of his/her personal property insurance
claim for the damaged equipment to Furman and
complete the Furman Connected Equipment Warranty
claim form (call Furman at (707) 763-1010 to obtain the
form). Furman reserves the right to review the damaged
Furman product, the damaged connected equipment, and
the site where the damage occurred. All cost of shipping
damaged equipment to Furman for inspection shall be
borne solely by the Purchaser. Damaged equipment must
remain available for inspection until the claim is fi nalized.
The Connected Equipment Warranty is also in effect for
a period of three years unless the Purchaser does not
complete the warranty registration within fi fteen days from
date of purchase, at which time, the Connected Equipment
Warranty period is also reduced to one year from the date
of purchase.
All warranties contained herein are null and void if: the
Furman Surge Protector in use during the occurrence
is not provided to Furman for inspection upon Furman’s
request at the sole expense of the Purchaser, Furman
determines that the Furman Surge Protector has been
opened, improperly installed, altered in any way or
tampered with, Furman determines that the damage did
not result from the Occurrence or that no Occurrence
in fact took place or Furman determines that the
connected equipment was not used under normal
operating conditions or in accordance with Manufacturer’s
instructions for the connected equipment. All Furman
Surge Protectors must be plugged directly into a properly
5