Furman Elite 15, Руководство пользователя

Страница: 4 / 8

ELITE 15 OWNER’S MANUAL
The box should contain the Elite-15 unit, rack
mount kit, owner’s manual, and warranty
registration card. If anything is missing, please
contact Furman Customer Service. Fill out
and return your warranty registration card.
Registration is recommended because it
can be used to establish whether the unit is
within the warranty period should your original
ownership documents be lost, and it assists us
in informing you about upgrades or other vital
information.
Safety Information - Warnings
Please read and observe all of the safety and
operating instructions before the Elite-15 is
operated. Retain these instructions for future
reference.
l
Do not disassemble or modify in any way.
No user-serviceable parts inside
l
Keep away from moisture and avoid
excessive humidity
l
Do not allow liquids or foreign objects to
enter the unit
The Elite-15 should be serviced by qualified
service personnel when:
l
The power supply cord or plug has been
frayed or cut.
l
Objects have fallen or liquid has spilled into
the unit.
l
The Elite-15 has been exposed to rain or
other moisture.
l
The Elite-15 does not appear to operate
normally, or exhibits a marked change
in performance.
l
The Elite-15 has been dropped, or the
enclosure damaged.
The Elite-15 requires that a safety ground be
present for proper operation. Any attempt to
operate the Elite-15 without a safety ground
is considered improper operation and will
invalidate the warranty.
Power Source
The power source to which the Elite-15 is
connected should be adequate for use at 15
Amps. The Elite-15 will operate with a10 Amp
service outlet; however, nuisance tripping
at the circuit breaker panel may result if the
systems continuous current draw exceeds 10
Amps.
Placement
The Elite-15 is manufactured with four rubber
feet for placement on any table, cabinet,
shelf, or floor. These rubber feet may be
easily removed with a standard Philips screw
driver when rack mounting adjacent to other
components. Placement or proximity to other
components is not critical, and the Elite-15
does not produce any appreciable heat under
standard use. The Elite-15 may also be rack
mounted in a standard 19” rack by attaching
the Elite-15 rack ears. These rack ears
(contained within the plastic rack kit package)
mount flush with the back portion of the Elite-
15’s front panel. They are attached to the
chassis by installing each rack ear with (3) pan-
head Philips screws contained within the Elite-
15 rack mounting kit. The third screw used for
each rack ear is for the center hole, located
towards the rear and aids in stabilizing the unit
when rack mounted.
Connections:
AC Cable Routing
The Elite-15’s male Edison AC cord must
be connected to an appropriate socket (see
current rating recommendation above).
3