11
Race Mode
Quickly tune to race frequencies, optimal for racing events
The options are as follows
:
2CH, 4CH, 6CH, 8CH
Hold
Select
button for about 2s, the pop-up will display:
Change:
select channel for your race mode
Exit Race:
exit to Screen Saver
Exit:
turn off the pop-up
Type:
choose the number channel for you race mode
Calibration
Why do we need to calibrate the True-D?
A Diversity receiver system is two receivers built into a single package, allowing the pilot
to choose two different antenna systems for maximum levels of video range & clarity.
With two receivers used by the diversity algorithm, you need to get accurate numbers
between the two individual modules for calculation of the best video signal in the
goggles.
Note:
when you update new firmware, you have to recalibrate your True-D.
How to do I calibrate the True-D diversity module?
Step 1: Remove all antennas on True-D and plug it into the goggles.
Note:
Verify that all pins on True-D are correct when plugged in the goggles.
Step 2: Plug Battery and verify that
Turned On
Rx Switch in the goggles.
Step 3: Turn on your VTX.
Step 4: Click
Select
button to open the navigation menu.
Step 5: Use
Up/Down
button to move to the
Settings
menu.
Step 6: At the
Settings
menu, use the
Up/Down
button to move the cursor to
select the
Calibrate
mode and Click
Select
button. Then, wait for the process
calibration to complete.