PAGE 2/2
ASSEMBLY INSTRUCTION
1
STEP 3.1
2
STEP 3.2
1
STEP 1
B
B
B
A
C
C
A
Finished
Edge
Finished
Surface
Finished
Surface
Finished
Surface
Finished
Surface
B
B
C
C
Finished
Surface
Finished
Surface
x 2
x 2
STEP 2
2.1 PLACE THE ASSEMBLED
UNIT TO THE DESIRED
MOUNTING LOCATION
AND MARK THE DRILL
POSITIONS ON WALL.
2.2 DRILL HOLES ON
EACH MARKED
LOCATION AND INSTALL
WALL PLUG (3),
AS SHOWN.
STEP 3
3.1 POSITION THE ASSEMBLED UNIT
TO THE WALL PLUG (3) ON WALL
AND TIGHTEN USING SCREW (1).
3.2 ATTACH COVERS (2) TO SCREWS’S
HEAD, AS SHOWN.
STEP 1
ATTACH PANELS (A) & (C) TO PANELS (B)
USING SCREWS (1) AND TIGHTEN IT,
AS SHOWN.
* Mark the point
to the wall.
1/4" Drill
3
STEP 2.2
* Mark the point
to the wall.
STEP 2.1
* Mark the point
to the wall.
