PAGE 3/3
5
6
D
C
E
C
F
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Periodically check all fittings and re-tighten
any screws as necessary.
NOTE:
1. Installation to Wood Stud Walls
1.1 Use a stud finder (commercially available) and mark the
location with an awl or pencil.
1.2 Pre-drill a hole in the wood stud at the marked location
to insert Screw (D) at Step 6.
2. Installation to Concrete & Brick Walls
2.1 Mark the location to be used for securing the unit.
2.2 Drill holes using an electric drill at the marked location.
2.3 Insert a Concrete Anchor (F) into the hole using hammer.
15
15
15
