STEP 2
Attach Short Tube (2) and Short Engrove Tube (4)
to Insert Cap (5), as shown.
Attach Shelf Panel (B) to assembled from Step 3
using Long Tube (1) and Long Engrove Tube (3),
as shown.
STEP 4
Slide Upper Back Panel (D) into the grooves of
Short Engrove Tubes (4), as shown.
STEP 3
STEP 1
Press Insert Cap (5) into Top Panel (A), as shown.
A
UNFINISHED
SURFACE
5
5
5
5
5 INSERT CAP - 4 PCS
INSERT CAP
INSERT
CAP
4 SHORT ENGROVE TUBE - 2 PCS
2 SHORT TUBE - 2 PCS
2
2
4
4
5
A
UNFINISHED
SURFACE
4
D
UNFINISHED
SURFACE
A
D
FINISHED
SURFACE
3 LONG ENGROVE TUBE - 2 PCS
1 LONG TUBE - 2 PCS
1
1
3
3
UNFINISHED
SURFACE
A
Using either a soft rubber mallet or by firmly
pressing the Insert Caps into the Top Panel
using the flat side of a book or other hard flat
surface to press the caps into the panel.
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
1
2
3
2pcs
2pcs
2pcs
A
1pcs
Top Panel
Long Engrove Tube
No
Hardware List
Qty
No
Qty
Parts List
Long Tube
Short Tube
4
5
6
2pcs
4pcs
2pcs
Leg
7
2pcs
No-Tip Feet
Short Engrove Tube
Insert Cap
B
C
1pcs
1pcs
Bottom Panel
Shelf Panel
D
E
1pcs
1pcs
Upper Back Panel
Bottom Back Panel
A
B
C
D
E
