NU_FMS5752_000_08012015_EN
Date: 08.01.2015 Page 13 / 16
Installation Guide
The steps to install:
Please turn off the power and switch of the device before installation. Do not power
on before connecting well.
1.
Put the holder into the hole of super DIN in the car.
2.
Connect the circuit in the car according to the directions of cables.
3.
Insert the connector and make sure it is fixed properly.
4.
Finally, put the device into the holder until it is fixed properly.
170 mm
6
0
m
m
R 0.5x4
C 5mm