![funtec 111106 Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/funtec/111106/111106_setup-manual_2346611007.webp)
1
2
Use two anchors per post.
Make sure to knock the
anchors into the ground at
a slight angle away from the
posts to aid tensioning, ideally
using a rubber mallet.
Put the larger loops at the
other end of the straps over
the top end of the posts and
put the posts up sloping
inwards. Then put the cable
loops attached to the top ends
of the net over the top of the
posts as well.
Elastic net centring: Connect
the black elastic cords to the
top of the post and then to
the red net cords at the top
corners of the net as shown.
The tension of the bungees will
keep the net centred between
the poles later.
To obtain the ideal position
for the sand anchors, unfold
the net completely
1
. The
loops at the ends of the top
cable mark the places for the
posts
2
. Drive the anchors
into the ground at a distance
of approx. 3 m from the post
position
3
to form an approx.
45° angle. Also refer to figure
no. 8 to get an overview of the
correct placement of posts and
anchors.
6
5
4
3