Funkwerk FAC 940, Руководство по эксплуатации

Страница: 21 / 24

Maintenance and service
The camera is maintenance-free.
The glass surfaces of the lenses and protective panels must be cleaned as required.
Troubleshooting
Camera not in operation (no output signal) Check wiring; check voltage supply (power supply
unit)
Camera in operation, but no picture Check wiring; configure or adjust lens correctly
Camera in operation, but picture out of focus Adjust back focus and lens.
A complete FAC 940 Service Manual can be obtained from your local Funkwerk office under
order no. 0043041-969.01.
Use the exchange pool at your local Funkwerk office if repairs are needed.
Service address: Funkwerk video systeme GmbH
Thomas-Mann-Str. 50
D-90471 Nürnberg
Tel.: +49 (0)911 75884-0
Fax: +49 (0)911 75884-100
Connector pin assignments of D-SUB system connector
Table 1
1
Remote control RXD_A 9 +U_BATT
2 Remote control RXD_B 10 ST2
3 ST1 11 GENLOCK GND
4 Remote control TXD_B 12 Remote control TXD_A
5 GENLOCK/LINE LOCK 13 -UBATT
6 -(C)VBS/C 14 GND
7 (C)VBS 15 GND
8 +(CVBS)/Y
View of the pins
Table 2: Pin assignments of lens connector
Auto iris lens Galvanometer Kangaroo lens ER lens
Connector pin 1 +12 V DC - Damping +12 V DC
Connector pin 2 + Damping
Connector pin 3 Video signal + Drive Control Control
Connector pin 4 GND - Drive GND GND
21 FAC 940