-13-
Installation
Audio 2010
6. 3. Preparation for installation of the components
Dismantle radio
1. Remove the radio panel carefully, with help of a plastic wedge. In this case it
is to be ensured that no holding lugs or interlocks are broken off.
2. According to type of the radio, the fixing screws are to be loosened with a
screwdriver or a special extraction tool.
Remove the plug connector from the radio (radio stations stored by the customer
are deleted).
Note:
Before the removal of the radio, it is to be noted whether a radio code is possibly
required. If indicating instruments for the airbag are integrated into the panel, you
should not switch on the ignition plug connector after pulling the plug connector,
since this can result in an error report of the airbag. (e.g. VW Passat 3 C)
6. 4. Fastening of the electronic box
The electronic box offers two possibilities for fastening.
Possibility 1 - through installation with bolts:
First stipulate the fastening points. Note that approx. 70 mm space for the plug
connection remains. Now mark the screw positions.
Use four sheet metal screws with the corresponding spacing washers for the
fixing of the electronic box. We recommend a sheet metal screw with the mea-
surements „ST 2.9x25 DIN 7981“. These are optimally suitable for the fixing of
the electronic box. Pre-drill with a 2 mm drill.
